Designed to lift the power and data module off the worktop yet provide easy accessibility. Utilises a standard 80mm cable port aperture, Rhapsody requires no further support and routes all feeder cables under the worktop.

Rhapsody is suitable for Hot-desking, personal power as well as assisting in meeting the requirements of the Disability Discrimination Act (DDA) in the workplace by providing facilities accessible to all on the work surface. Used in conjunction with Cable Spine, the power and data cables are routed through the curved tube and may be fed directly into a Cable Spine providing a neat solution for cable management.
 
When used in conjunction with underdesk modules the Rhapsody can provide the total workstation solution.

Available in black or silver

All Office Electrics products are manufactured to enable compliance with BS6396 or BS7671 where relevant.
 

Features:

 
Configuration:
Power only, Data only and combined usage (Power and Data).

Segregation:
combined use units- Power and Data are internally segregated.

Insulation:
Fully earthed aluminium casing with fire retardant ABS fascias. As standard a 2000V protective membrane is incorporated to give additional insulation/protection.

Earthing:

Earthing facilities are provided in the rear of the unit.

Fusing:
5 x 20mm ‘slo-blo’ anti-surge ceramic fuses.

Fuse clips:
Colour coded fuse clips (3.15A and 5.00A) to comply with the fuse marking requirements of BS6396.

 
Please consider our modular components for the wide range of all Power and Data outlets available. 
 
Inlets/Outlets:

Power:
Hardwiring
- 1.5mm2 or 2.5mm2

Data:
- Up to 4 cables  can be passed through the arm.

Protection:
Power cleaner, surge protector, MCB, RCD, RCBO, etc.

Security:
Tamper restrictive screws are used as standard.
Anti-Flex system: A unique full length locking system, which guarantees unit integrity, regardless of the length of the unit.

Testing:
100% fully tested before despatch

Rhapsody

The Rhapsody is designed to be fitted into a 80mm cable port hole standard on many desk ranges.

Where no aperture is available this may be easily be cut, even on site, by using a hole saw

Rhapsody may be placed in position with the cables fed through the hole and then the lock ring is

fed up on the underside of the worktop over  the bolts and locked with the nuts provided.

Rhapsody is made to order so that any thickness of worktop can be accommodated with

appropriate length studs. Please indicate worktop thickness on order.

Please call of email for more information

All Office Electrics products are manufactured to enable compliance with BS6396 or

BS7671 where relevant.